UV-DESIGN UV-150 U
View Detailed
EIT PowerPuck Ⅱ UV
View Detailed
TM400 Window-Tint-
View Detailed
TDS100 Moisture me
View Detailed
NITTO JEX-2800A SC
View Detailed
NEWS CENTER Home > News Center
Show News
UV curing equipment drying FAQ
Date:2013/6/7 12:52:05

UV curing equipment drying FAQ
     UV curing equipment drying chamber body mainly by drying, heating system and temperature control components. Drying or curing equipment directly related to the normal coating production line can function correctly. Drying curing coating production line equipment is relatively less problematic in terms of other devices, but in terms of thermal insulation and safety should attract attention.
1、outer surface temperature drying room
     Chamber body is caused by the improper selection of insulation materials insulation is poor, excessive surface temperatures and heat retention mainly the main reason. This not only causes increased energy consumption, do not meet national standards: drying room should have good insulation, the outer wall surface temperature should not exceed room temperature 15 ℃.

2、drying curing equipment exhaust pipe set incorrectly or not set
     Some coating production line drying curing chamber exhaust nozzle did not receive outside, and in the workshop, the exhaust gas directly into the workshop, the workshop causing air pollution; Some coating production line drying curing chamber exhaust vent do not set the highest concentration in the exhaust gas of the site, is not conducive to rapid discharge of exhaust gas to prevent the accumulation does not conform to national standards, the drying chamber exhaust port location should be provided in the region with the highest concentration of combustible gas.
     After spraying the workpiece into the drying curing chamber, due to varying degrees paints containing organic solvents, drying curing process will produce an organic solvent emissions, emissions of organic solvents are flammable, if not timely exhaust gas to accumulate in the drying chamber and drying indoors, once high concentrations can cause security risks.

 
  © 2007-2018 BIKESU Technology co.,ltd.  粤ICP备07501980号-1
  Add:RM 212 Mingdu Building Xinhe Avenue Shajing Street Baoan District SZ Tel:0755-29931617 Fax:0755-85278851