UV-DESIGN UV-150 U
View Detailed
EIT PowerPuck Ⅱ UV
View Detailed
TM400 Window-Tint-
View Detailed
TDS100 Moisture me
View Detailed
NITTO JEX-2800A SC
View Detailed
NEWS CENTER Home > News Center
Show News
Care and maintenance of pneumatic tools!
Date:2013/9/10 15:16:29
Confucius said: " We must first sharpen his tools" to complete the processing and assembly task , we must first use the appropriate tool for their own good . But pneumatic tools can not just use it, rather than to maintenance it , then it will reduce the service life , so to talk about the care and maintenance of pneumatic tools
 
1 - Safety specifications
When using pneumatic tools , be sure to read the accompanying manual to understand the entire contents of the future , we can no longer work the occasion to use pneumatic tools, and in accordance with the instruction manual strictly enforced.
 
2 Precautions
( 1 ) Never point the tool at yourself or others.
( 2 ) Do not let the air pipes from impact and damage.
( 3 ) replacement of parts and tools pneumatic tools when you're removed from the air at source .
( 4 ) operation , please wear overalls , please do not wear loose clothing to avoid being involved in moving parts and cause danger.
( 5 ) operation possible wear safety goggles and masks to protect their own safety .
( 6 ) In the high-pressure gas source and pneumatic tools to connect , do not use it in the absence of the press .
( 7 ) Loose parts may be dangerous to you , please feel free to ensure safety.
( 8 ) Use the dedicated parts replacement of worn parts.
( 9 ) Tighten all screws before use to determine the safety of equipment .
 
3 . Maintenance issues
( 1 ) requires the use of pneumatic tools required before and after lubrication.
( 2 ) air motor lubrication every day , but do not lubricated too many times .
( 3 ) Do not dismantle without disassembly repair parts.
( 4 ) Be careful when dismantling to avoid parts damage .
( 5 demolition tools when kept clean to avoid debris entering .
 
4 Letter to matters
1 before lubricating the tool Unplug from the high-pressure zone air source .
( 1 ) Disconnect the tool from the high-pressure zone .
( 2 ) while pressing the trigger from the inlet header added 3 ~ 5c.c pneumatic tools for oil. Connect the tool high pressure air source , and in the vent hood rag or towel . Start the tool , is to reverse the 20 to 30 seconds , when the high-pressure gas connected to the operation, the oil discharged from the rear vent .

(2) the impact of aircraft set of partial lubrication ( grease )
Shock Rack pack should make one every week lubrication and maintenance .
( 1 ) Disconnect the tool from the air line .
( 2 ) removal of the front cover screws ( or directly to release the front cover ) will stand inside the front cover and the impact on the remaining butter Wash group .
( 3 ) the impact on the coated frame set amount of butter, and then lock the front cover.
( 4 ) connected to the pneumatic tube , gently start trigger idling 20 to 30 seconds for the entire impact of grease lubrication unit
 
  © 2007-2018 BIKESU Technology co.,ltd.  粤ICP备07501980号-1
  Add:RM 212 Mingdu Building Xinhe Avenue Shajing Street Baoan District SZ Tel:0755-29931617 Fax:0755-85278851