|
|
|
|
|
|
|
INTRODUCTION
NITTO SCALING & GRINDING pneumatic grinder
MYTON can correspond to a wide variety of special operations, the high power of the motor to achieve the grinding efficiency! ● cushion vibrations leverage. ● Replace the wheel spindle lock mode is very simple. ● absorb vibrations will not feel cold feeling using a resin handle. ● Slide the wrench mounted on the sides. ● regulator structure. Technical Specifications Model: MAS-40 Working pressure: 0.6 (6) MPa (kgf/cm2) Air consumption (no load): 0.45m3 / min No load number of turns: 13,000 (rpm) Wheel diameter: Ø100mm Hose Size: 3/8inch Body mass (weight): 0.9kg Standard accessories • 6 corner bar wrench 6mm: 1 个 • Wrench 17mm: 1 个 • Socket PT1 / 4 x NPT1 / 4: 1 个 • Hose Connector NPT1 / 4 x 3/8: 1 个 |
|||||||||||||||||||||||||||||||||||||
 |
 |
|
||
UV-integrator
