UV-DESIGN UV-150 U
View Detailed
EIT PowerPuck Ⅱ UV
View Detailed
TM400 Window-Tint-
View Detailed
TDS100 Moisture me
View Detailed
NITTO JEX-2800A SC
View Detailed
PRODUCTS LIST Home > Product Show
UV-DESIGN UV-1400 UV-integrator

Product Numbers: 20133116652

Price: US $760

Product description:UV-DESIGN UV-1400 UV-integrator If the process is especially needed, and can be repeatedly measured, and each time after the measurement readings, no-return-to-zero processing, then the last displayed on the instrument readings will be the accumulated value is repeatedly measured.

INTRODUCTION

The new UV-DESIGN 1400 handle UV-integrator UV joulemeter in Germany

: UV 250-410nm (nanometers) optimum sensing UV wavelength of 365nm (nanometers) spectral range.
Intensity range: 0-5,000 mW/cm2 (milliwatts / square centimeter)
Scale range: 0-999999 mJ/cm2 (mJ / cm ²)
Power Supply: 3.6V lithium battery
Battery life: 10,000 hours under normal operating conditions
Dimensions: disc with a handle structure, diameter 140mm (mm) and a height of about 13mm (mm)
Weight: 400g (grams)
Ambient temperature: 0 to 75 ° C (degrees Celsius) to 110 ° C (Celsius) under the conditions of continuous exposure to no more than 10s (seconds)
Calibration cycle: all electronic components such as: sensors, often with the use of time and aging, to ensure more accurate measurement accuracy and effectiveness, it is recommended to check a period of one year.
Warranty period: one year warranty from the purchase date, except for man-made damage or damage caused by objective factors.
Use of the instrument switch to the open state that the "ON" position is displayed on the LCD display reading of "0" mj/cm2 (mJ / sq cm), if not particularity purposes, before every measurement. its readings to zero.
If the process is especially needed, and can be repeatedly measured, and each time after the measurement readings, no-return-to-zero processing, then the last displayed on the instrument readings will be the accumulated value is repeatedly measured.
When the measurement is complete, you need to switch to the "OFF" position, in order to turn off the instrument, correct operation will effectively extend the instrument battery.
Avoid force frequent shaking instruments or broken equipment;
2. Every measurement is completed, please turn off the instrument back into the custody of the box;
3. Measurement, do not look directly at the UV light source, avoid bare skin exposed to strong radiation;
Measurement to avoid the front of the instrument LCD directly placed in a strong light or high heat environment.

  © 2007-2021 BIKESU Technology co.,ltd.  粤ICP备07501980号
  Add:RM 212 Mingdu Building Xinhe Avenue Shajing Street Baoan District SZ Tel:0755-29931617 Fax:0755-85278851